Sick and tired of your mold and mildew problem?
MoldZyme (formerly Zymo-cat) Mold & Mildew Cleaner is made from a naturally occuring enzyme. It is completely biodegradable, nontoxic, harmless to humans, pets, plant life and marine life. Non-toxic; bio-degradable; no chlorine; no petroleum solvents; no glycol ethers; no phosphates; no acids; no caustics; not tested on animals; unscented and no dyes; safe for septic systems. You can use it on any surface that is not harmed by water (so no silk, or anything that would have to dry cleaned). Spray it on, let it sit for about five minutes and wipe it off.
Applications: Bathrooms, Showers, Bath Houses, Boats, Basements, Crawl Spaces, Kitchens, Ducts, Vents, Walls, Floors, Ceilings, Roofs, Patios, Patio Furniture, Decks, Sidewalks, Driveways, Horse Saddles, Rail Cars, Tanker Trucks, Silos, Manufacturing Facilities, Processing Equipment, and any surface that is washable with water. Also suitable for Power Washers and Pressure Washers
Surfaces: Concrete, Cinder Blocks, Bricks, Stone, Aluminum Siding, Vinyl Siding, Ceramic Tiles, Wood, Wall board, Sheet Rock, Plastic, Leather, and more.
The way it works is that it removes the outer sheath of the mold, dissolving what is called the mycofilm of the mold, and allows you to clean mold and the associated stain off any surface. Typically, if you spray it on, the mold color will go away, but it is better to wipe it off. There are many applications like crawl spaces and other places where appearance is not that important, and in those places you don't need to wipe it off (it will still do its job). But if it is visible it's better to wipe off after five minutes. And then the mold is gone!
One gallon of MoldZyme® Ready-To-Use product will treat approximately 350 square feet. Dilution ratio is 1 oz on concentrate to 96 oz of water.
There might be a slight fragrance upon initial opening, but once in use is Fragrance Free!
The shelf life of this product is 2 years.
Click here for the MSDS form.
Ingredients:
Water, enzymes (an extract from sugarcane fermentation) and surfactants (from coconuts).
Directions:
Fill a bottle with 32oz. of water (use filtered water for best performance), then pour in the 2 oz. concentrate bottle. Close bottle, swirl contents to combine solution.
Do not mix with bleach, ammonia, or other chemicals. Apply MoldZyme® to affected area and wipe away mold and mildew stains with a cloth or brush. Scrub discolored grout with a brush. For severe stains, let MoldZyme stand for several minutes. MoldZyme can be used outdoors with use of a pressure washer. Repeat applications periodically as needed. Read bottle label for more details.
Each 2oz refill packet will make one 32oz bottle of ready to use spray.
MoldZyme Super Concentrate is for serious mold stain removal. With a dilution ratio of 1 part concentrate to 100 parts water (3 Tbs. per 1gal. water) you will be able to take on even the toughest jobs.
