The Airpura R600 is a professional grade air purifier, available for the first time in a consumer model. This unit features an ultra-efficient design, 100% industrial-grade components used in manufacture, all offered for the price of a typical home system. Designed specifically for airborne chemicals, gases and particles, this is the best choice to bring relief to allergy and asthma sufferers.
The Airpura motor, and airflow pattern, have been engineered to minimize turbulence. Minimizing turbulence minimizes sound, so the Airpura is effective while still being quiet. The unit is rated to effectively clean a 2000 square ft room. This high efficiency air purifier will make a huge difference for all allergies: dust, mold, dust mites, pollen, tobacco, perfumes, paint fumes, carpets or even your neighbor's toxic laundry products.
The EPA estimates that indoor air is anywhere from 3 to 5 times dirtier than outside air, even in dense metropolitan areas. Scary huh? Airpura purifiers operate at an air flow of 560 CFM (cubic feet per minute), ensuring that the air in your home is not only effectively cleaned, but purified in large enough and quick enough volumes that your home will always contain fresh air. Airpura HEPA filters trap 99.97% of particles as small as 0.3 microns (Particles of this size are likely to be inhaled and deposited into the lungs and trigger allergic and asthmatic reactions).
Carbon Filters absorb airborne chemicals, noxious gases and odors. Carbon filters typically last up to 2 years depending upon use.
Hepa Filters - trap 99.97% of particles as small as 0.3 microns. Hepa filters typically last 5 years in regular use.
Pre-filters can be vacuumed from the exterior of the unit and should be changed every 12 months depending on use.
| Technical specifications on the Airpura 600 newest air purifiers |
|
560 cfm air flow effective up to 2000 square ft. 62@2 decibels on high and 32@2 decibels on low
|
| Permanent split capacitor, backward curved motorized impeller |
| 120 watts on high 40 watts on low and 115 volts or 220 volts |
| HEPA 40 square ft: warm rolled to prevent cracking 10 pleats per square inch maximizes filtration (other systems only use 6-8 folds ) Spacers to make sure every fold filters |
|
Carbon 18 - 30 lbs regular or special blend 52 square in surface area 13" high 11.5" diameter 2"-3" deep.
Carbon can be refilled easily or whole cartridge replaced. You have a choice
|
| Pre-filter: 1" deep 56 square in that is vacuumed thru the holes in the body and replaced once a year . |
| ETL Certified Conforms to ANSI/UL 507 CSA C22.2 no 113 |
| Powder steel body+easy 4 roll casters |
| 23 " high x 15 "diameter"48 lbs of total weight in black white or sandstone |
