Welcome to Greenhome.com!

Register to earn rewards! Click here for free shipping.

What's Wrong With Styrofoam?

Posted on April 12, 2018 by Rachel Tardif There have been 0 comments

Styrofoam is the common name for a type of plastic known as expanded polystyrene foam. This foam has been valued for its buoyance and high insulation capacity since the 1960s, and it’s used to manufacture items like coffee cups, coolers, food containers, and shipping materials. In fact, the term “Styrofoam” is the trade name only for a specific type of insulating foam produced by the Dow Chemical Company, so much of what is referred to as Styrofoam is actually a generic polystyrene foam. But not matter what you call it, expanded polystyrene foams are a health and environmental hazard you’ll want to avoid.

Problems With Plastic Foams

Chemicals Hazards

Polystyrene foams are made from styrene, a derivative of the chemical benzene, that is fused into long chains and then expanded using heat and steam. There is no benzene in finished polystyrene foams, but the workers who manufacture them are at risk for benzene exposure. The detrimental health effects of benzene are well-known and severe: even short-term exposure to benzene vapors can lead to dizziness, disorientation, or unconsciousness. Long-term exposure can cause anemia, excessive bleeding, and depression of the immune system. Benzene is also a known cause of several types of cancer, including leukemia.

There is less consensus on the health effects of styrene. Short-term exposure is irritating to the gastrointestinal tract and eyes; long-term exposure causes headaches, fatigue, hearing loss, and weakness. It is currently classified by the National Toxicological Program’s 12th Report on Carcinogens as reasonably anticipated to be a carcinogen. Again, workers involved in the manufacture of polystyrene foams are at the most risk of styrene exposure. There have been studies that suggest styrene can migrate from packaging into food, but the evidence on the extent of the migration is inconclusive.

Petroleum

Benzene is derived from petroleum, so the use of polystyrene foam products contributes to the sizable negative impact of oil acquisition and processing, including the pollution of natural systems, the emission of greenhouse gasses, and habitat destruction.

Ozone Impact

Historically, polystyrene foams were made using chlorofluorocarbons (CFCs) as the expanding agent. This practice was discontinued in the 1980s after the discovery of CFCs’ destructive effect on the ozone layer. Polystyrene foams are now manufactured using hydrochlorofluorocarbons (HCFCs). HCFCs have 1-10% of the ozone depletion potential of CFCs, so while less destructive they are still actively depleting the ozone layer.

Disposal

Polystyrene foams account for .25% of garbage in the U.S. by weight, but because they’re so bulky, it’s estimated that they occupy as much as 30% of landfill space. Like all plastics, they are non-biodegradable, which means that once discarded they will remain in overcrowded landfills indefinitely. As of 2006, the U.S. was discarding over 14 million tons of polystyrene products annually.

Recycling Plastic Foams

Polystyrene is recyclable (plastics made from it will be marked #6), and polystyrene foams can be recycled into new packing materials or other plastic products such as coat hangers and cd jewel cases. However, the volume of polystyrene foam makes it difficult to collect and transport, which hampers curbside collection. Recycling availability varies by location. Polystyrene foams are not accepted at most recycling centers, but the Alliance of Foam Packing Recyclers operates numerous drop-off locations throughout the U.S. as well as a mail-back recycling program, and the Plastic Loose Fill Council operates drop-off sites and a hotline for recycling of loose packing peanuts.

Alternatives

The easiest way to reduce polystyrene foam waste is to replace disposable products such as cups, coolers, and lunch tray with reusable items. If disposable products are needed, there are numerous paper and other alternatives that are recyclable and/or biodegradable. Starch-based plastics like PLA and paper products like bagasse can replace take out containers and disposable kitchenware, and both are easily recyclable and much less damaging to the environment to produce. It’s also possible to find green shipping containers and packaging made from paper and biodegradable plastics that will protect valuables without ending up in landfills.

Bans on Polystyrene Foam

At the moment there are no national or statewide attempts to regulate polystyrene foams. There are, however, over 100 cities, including Los Angeles and Portland, OR, that have enacted bans on the use of polystyrene foams for prepared food. Efforts to enact a statewide ban in California were shelved in late 2011, but legislators say it will be reexamined sometime in 2012. If you’d like to see polystyrene foams banned in your town or state, get in touch with your local representatives to have your voice be heard.


This post was posted in Blog and Green Library, Defining Green, Reduce, Reuse, Recycle and was tagged with COMPOSTABLE, ecofriendly, HEALTH SENSITIVE, Living Green

Comments

You must be logged in to post a comment.

Green first what matters most. Your trusted online source for green products since 1999
Green Home is the original online ecostore, based in San Francisco, California, in the heart of both the environmental and cleantech industries. Since 1999 Greenhome.com has played its part as one of the most comprehensive online resources for greening your home and greening your business. Our company is on a mission to green the world, one person (and one business) at a time. While all of our products are eco-friendly, we are especially passionate about compostable plates, cups, bowls, cutlery & utensils, take out containers and bags.  If more businesses and individuals switched from disposable to compostable we could make a real impact on the world!

San Francisco Green Business B Corps Certified green america gold certified business